GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 334092  Size: SH
  1. Remove the left side rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the lock rods from the left side rear door latch handle (4).
  3. Remove the nuts (2) that retain the left side rear door latch handle (4) to the left side rear door.
  4. Remove the left side rear door latch handle (4) from the left side rear door.

Installation Procedure


    Object Number: 334092  Size: SH
  1. Install the left side rear door latch handle (4) to the left side rear door.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the nuts (2) in order to retain the left side rear door latch handle (4) to the left side rear door.
  4. Tighten
    Tighten the retaining nuts to 11 N·m (97 lb in).

  5. Install the lock rods to the left side rear door latch handle (4).
  6. Install the left side rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .