GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Savana 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Door Outside Handle and License Pocket Replacement

Removal Procedure

    Object Number: 334068 Size: SH
  1. Remove the right side rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the lock rods from the lock.
  3. Remove the nuts from the right side rear door outside door handle and license pocket.
  4. Remove the bracket that retains the right side rear door outside door handle and license pocket to the right rear door.
  5. Remove the right side rear door outside door handle and license pocket from the right rear door.

Installation Procedure

    Object Number: 334068 Size: SH
  1. Install the right side rear door outside door handle and license pocket to the right rear door.
  2. Install the bracket that retains the right side rear door outside door handle and license pocket to the right rear door.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts that retain the bracket to the right side rear door outside door handle and license pocket.

    4. Tighten
    Tighten the retaining nuts to 11 N·m (97 lb in).

  4. Install the lock rods to the lock.
  5. Install the right side rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .