Seat Riser Replacement Front

1. Remove the front seat assembly from the vehicle. Refer to Seat Replacement .



2. Remove the nuts (2) that retain the seat riser (3) to the seat adjuster (1).
3. Remove the front seat riser from the seat adjuster.

1. Install the front seat riser (3) to the seat adjuster (1).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the nuts (2) in order to retain the seat riser to the seat adjuster.

Tighten
Tighten the nuts in order to retain the seat riser to the seat adjuster to 45 N·m (33 lb ft).

3. Install the front seat assembly to the vehicle. Refer to Seat Replacement .