Removal Procedure
- Remove the side rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Disconnect the side rear door lower latch lock rod (1) from the
side rear door lower latch (2).
- Remove the bolts (4) that retain the side rear door lower
latch (2) to the door.
- Remove the side rear door lower latch (2) from the door.
Installation Procedure
- Install the side rear door lower door latch (2) to the door.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the bolts (4)
that retain the side rear door lower latch (2) to the door.
Tighten
Tighten the bolts to 25 N·m (18 lb ft).
- Connect the side rear door lower latch lock rod (1)
to the side rear door lower latch (2).
- Remove the side rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.