Was the Power Door Locks System Check performed?

--

Go to Step 2

Go to Power Door Locks System Check

1. Disconnect the connector at the rear door lock actuator motor.
2. Connect an unpowered test lamp between the rear door lock actuator motor connector, cavity A for CKT 294 (TAN), and ground.
3. Depress any power door lock switch to perform the unlock operation.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Repair the open in CKT 295 (GRY) between splice S244 and splice S315.

Refer to Wiring Repairs .

Is the repair complete?

--

Go to Power Door Locks System Check

--

Repair the open in CKT 294 (TAN) between splice S243 and splice S314.

Refer to Wiring Repairs .

Is the repair complete?

--

Go to Power Door Locks System Check

--