GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Savana 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Center Track Bumper Replacement

Removal Procedure

    Object Number: 334046 Size: SH
  1. Remove the passenger side body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side in Interior Trim.
  2. Remove the nut that retains the sliding door stop to the body.
  3. Remove the sliding door stop from the vehicle.

Installation Procedure

    Object Number: 334046 Size: SH
  1. Install the sliding door stop to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nut in order to retain the sliding stop to the body.

    3. Tighten
    Tighten the retaining nut to 11 N·m (97 lb in).

  3. Install the passenger side body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side in Interior Trim.