Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Power Door Locks System Check performed? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 8 |
3 | Connect a J 39200 between the power door lock control module connector, cavity A for CKT 150 (BLK), and ground. Is continuity present? | -- | Go to Step 4 | Go to Step 9 |
4 |
Is continuity present? | -- | Go to Step 5 | Go to Step 6 |
5 |
Is continuity present? | -- | Go to Step 10 | Go to Step 11 |
6 |
Does the test lamp light? | -- | Go to Step 7 | Go to Step 12 |
7 |
Does the test lamp light? | -- | Go to Step 13 | Go to Step 14 |
8 | Repair the open in CKT 540 (ORN) between splice S228 and the power door lock control module. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
9 | Repair the open in CKT 150 (BLK) between the power door lock control module and ground G201 or ground G200 in vehicles with upfitter provisions. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
10 | Repair the short to ground in CKT 158 (WHT/BLK) between the power door lock control module and the side door jamb switch. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
11 | Replace the side door jamb switch. Refer to Sliding Door Jamb Contact Plate Replacement . Is the repair complete? | -- | -- | |
12 | Repair the open in CKT 195 (LT BLU) between splice S241 and the power door lock control module connector, cavity C. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
13 | Replace the power door lock control module. Is the repair complete? | -- | -- | |
14 | Repair the open in CKT 195 (LT BLU) between splice S241 and the power door lock control module connector, cavity H. Refer to Wiring Repairs . Is the repair complete? | -- | -- |
