Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Power Door Locks System Check performed? | -- | Go to Step 2 | |
2 | Check the condition of the PWR ACCY fuse A in the IP fuse block Is the fuse open? | -- | Go to Step 7 | Go to Step 3 |
3 |
Does the test lamp light? | -- | Go to Step 4 | Go to Step 8 |
4 | Connect a J 39200 between the power door lock relay connector, cavity D for CKT 150 (BLK), and ground. Is continuity present? | -- | Go to Step 5 | Go to Step 9 |
5 |
Is continuity present? | -- | Go to Step 6 | Go to Step 10 |
6 | Connect a J 39200 between the left front power door lock actuator motor connector, cavity B, and the power door lock relay connector, cavity E, for CKT 295 (GRY). Is continuity present? | -- | Go to Step 11 | Go to Step 12 |
7 | Repair the short to ground in CKT 540 (ORN). Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
8 | Repair the open in CKT 540 (ORN) between the IP fuse block and the power door lock relay. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
9 | Repair the open in CKT 150 (BLK) between the power door lock relay and ground G201 or ground G200 on vehicles with upfitter provisions. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
10 | Repair the open in CKT 294 (TAN) between the power door lock relay and splice S243. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
11 | Replace the power door lock relay. Is the repair complete? | -- | -- | |
12 | Repair the open in CKT 295 (GRY) between the power door lock relay and splice S244. Refer to Wiring Repairs . Is the repair complete? | -- | -- |
