Was the Power Door Locks System Check performed?

--

Go to Step 2

Go to Power Door Locks System Check

1. Remove the power door lock relay from the connector.
2. Connect an unpowered test lamp between the power door lock relay connector, cavity A for CKT 194 (WHT), and ground.
3. Depress any power door lock switch to perform the unlock operation.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Replace the power door lock relay.

Is the repair complete?

--

Go to Power Door Locks System Check

--

Repair the open in CKT 194 (WHT) between splice S242 and the power door lock relay.

Refer to Wiring Repairs .

Is the repair complete?

--

Go to Power Door Locks System Check

--