Tools Required

J 9886-01 Door Handle Clip Remover

1. Use J 9886-01 Door Handle Clip Remover in order to remove the window regulator handle (2), if equipped.
2. Remove the window regulator handle bezel (4), if equipped.
3. Remove the front door garnish. Refer to Front Side Door Front Garnish Molding Replacement .
4. Remove the front door trim plate. Refer to Door Trim Plate Replacement .
5. Remove the screws from the armrest.



6. Lift up on the front door trim panel in order to release the retaining tabs (2) on the front door trim panel.
7. Remove the front door trim panel from the vehicle.

1. Install the front door trim panel to the vehicle.
2. Align the retaining tabs (2) on the front door trim panel with the holes in the door.
3. Push down on the retaining tabs (2) in order to lock the retaining tabs (2) into place.



4. Install the screws to the armrest.
5. Install the front door front garnish. Refer to Front Side Door Front Garnish Molding Replacement .
6. Install the front door trim plate. Refer to Door Trim Plate Replacement .
7. Install the window regulator handle bezel (4), if equipped.
8. Install the window regulator handle (2), if equipped.