The latched side window is a 1 piece assembly that includes the following components:

1. Remove the garnish molding, if equipped.



2. Remove the screws that retain the latch to the vehicle.
3. Remove the nuts (3) that retain the hinge to the vehicle.
4. Remove the window assembly from the vehicle.

Do not replace the weatherstrip (2) unless the weatherstrip is damaged.

1. Install the window assembly to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the nuts (3) that retain the hinge to the vehicle.

Tighten
Tighten the nuts to 10 N·m (89 lb in).

3. Install the screws that retain the latch to the vehicle.

Tighten
Tighten the screws to 3 N·m (27 lb in).

4. Install the window garnish molding to the window opening, if equipped.