Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Has the Remote Keyless Entry System Check been performed? | -- | Go to Step 2 | |
2 |
Did the test lamp light? | -- | Go to Step 4 | Go to Step 3 |
3 | Locate and repair the open in the CKT 540 (ORN) wire between the S228 remote control door lock receiver connector cavity E. Is the repair complete? | -- | -- | |
4 | Connect an unpowered test lamp between the remote control door lock receiver connector cavity F for the CKT 540 (ORN wire and ground. Did the test lamp light? | -- | Go to Step 6 | Go to Step 5 |
5 | Locate and repair the open in the CKT 540 (ORN) wire between the S228 remote control door lock receiver connector cavity F Is the repair complete? | -- | -- | |
6 |
Is continunity present? | -- | Go to Step 8 | Go to Step 7 |
7 | Locate and repair the open in the CKT 150 (BLK) wire between the remote control door lock receiver and S206. Is the repair complete? | -- | -- | |
8 |
Does the known good transmitter operate the keyless entry system? | -- | Go to Step 9 | Go to Step 10 |
9 | Replace the old transmitter. Is the repair complete? | -- | -- | |
10 |
Is the repair complete? | -- | -- |
