GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Savana 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Windshield Washer Solvent Container and Pump Replacement

Removal Procedure

    Object Number: 497983 Size: SH

    Important: Do not disconnect the brake lines from the master cylinder.

  1. Remove the master cylinder. Refer to Master Cylinder Replacement .
  2. Set the master cylinder aside.
  3. Remove the bolt from the washer solvent container.

    4. Object Number: 497985 Size: SH
  4. Lift the washer solvent container up enough to access the washer hose and the electrical connector.
  5. Disconnect the washer hose from the washer pump.
  6. Disconnect the electrical connector from the washer pump.
  7. Remove the washer solvent container from the vehicle.

    8. Object Number: 497987 Size: SH
  8. Remove the washer pump from the washer solvent container.

Installation Procedure

    Object Number: 497987 Size: SH
  1. Install the washer pump in the washer solvent container.

    2. Object Number: 497985 Size: SH
  2. Connect the electrical connector to the washer pump.
  3. Connect the washer hose to the washer pump.
  4. Position the washer solvent container into the locating holes in the chassis.

    5. Object Number: 497983 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the washer solvent container with the bolt.

    6. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  6. Install the master cylinder. Refer to Master Cylinder Replacement .