Was the Exterior Lights System Check performed?

--

Go to Step 2

Go to Exterior Lights System Check

1. Disconnect the connector at the headlamp switch.
2. Connect an unpowered test lamp between the headlamp switch connector cavity H for CKT 240 (ORN) and ground.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

1. Remove the bulb from the left front side marker lamp.
2. Connect a J 39200 between the LF side marker lamp cavity A for CKT 9 (BRN) and the headlamp switch connector cavity S.

Is continuity present?

--

Go to Step 5

Go to Step 6

Repair the open in CKT 240 (BRN) between the IP fuse block and the headlamp switch.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Replace the headlamp switch.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Repair the open in CKT 9 (BRN) between the headlamp switch and S225.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Was the Exterior Lights System Check performed?

--

Go to Step 2

Go to Exterior Lights System Check

1. Disconnect the connector at the headlamp switch.
2. Connect an unpowered test lamp between the headlamp switch connector cavity H for CKT 240 (ORN) and ground.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

1. Remove the bulb from the left front side marker lamp.
2. Connect a J 39200 DMM between the headlamp switch connector cavity S and the left front side marker lamp connector cavity A for CKT 9 (BRN).

Is continuity present?

--

Go to Step 5

Go to Step 6

Repair the open in CKT 240 (BRN) between the IP fuse block and the headlamp switch.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Replace the headlamp switch.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Repair the open in CKT 9 (BRN) between the headlamp switch and S225.

Is the repair complete?

--

Go to Exterior Lights System Check

--