Removal Procedure
- Siphon the power steering fluid from
the reservoir.
- Disconnect the hose (3) from the pump (2).
- Disconnect the hose (3) from the reservoir.
- Remove the hose from the vehicle.
Installation Procedure
- Install the hose (3) to the power steering
pump.
- Install the hose to the power steering reservoir (1).
Make sure the clamps are positioned at the end of the hose
- Fill the power steering reservoir with fluid. Refer to
Checking and Adding Power Steering Fluid
.
- Bleed the power steering system. Refer to
Power Steering System Bleeding
.