Tail Pipe Replacement Cargo and Passenger

1. Raise the vehicle and suitably support the vehicle with safety stands.



2. Loosen the rear clamp from the muffler.



3. Remove the hanger from the exhaust system as required.
4. Remove the tailpipe from the vehicle.

1. Install the tailpipe to the vehicle.
2. Install the hanger to the exhaust system as required.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the clamp.

Tighten
Tighten the clamp to 47 N·m (35 lb ft).

4. Remove the safety stands.
5. Lower the vehicle.