GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Savana 🢒 Engine 🢒 Engine Electrical 🢒 Battery Limiter Replacement

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Cable Replacement in Engine Electrical.

    2. Object Number: 184036 Size: SH
  2. Remove the ground strap from the inner fender well.

    3. Object Number: 184038 Size: SH
  3. Remove the retaining bolts from the fender panel.
  4. Remove the battery limiter from the fender panel.

Installation Procedure

    Object Number: 184038 Size: SH
  1. Install the battery limiter to the fender panel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the retaining bolts to the fender panel.

    3. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  3. Install the ground strap to the inner fender wall.

    4. Tighten
    Tighten the ground strap bolt to 10 N·m (89 lb in).


    Object Number: 184036 Size: SH
  4. Connect the negative battery cable.

    5. Tighten
    Tighten the cable to 10 N·m (89 lb in).