Removal Procedure
- Remove the retainer at the top of the
side front door weatherstrip.
- Remove the side front door weatherstrip from the top of the door.
Use 3M Release Agent or the equivalent.
- Pull the side front door weatherstrip in order to remove the weatherstrip
from the channel on the side of the door.
- Remove the side front door weatherstrip and the retainers from
the bottom of the door.
- Clean the door of all of the old adhesive.
Installation Procedure
- Use the following method in order to
install the side front door weatherstrip to the channel on the side of the
door:
| 1.1. | Apply a mild soap and water solution to the side front door weatherstrip. |
| 1.2. | Start the installation at the bottom of the channel in the door. |
| 1.3. | Slide the side front door weatherstrip up the channel to the top
of the door. |
- Install the side front door weatherstrip to the top of the door.
If you are reusing the old weatherstrip, use GM Weatherstrip
Adhesive GM P/N 12345097, or the equivalent, in order to retain
the top of the weatherstrip to the door.
- Install the retainer in the top of the weatherstrip to the door.
- Install the side front door weatherstrip to the bottom of the
door.
- Press the retainers in the side front door weatherstrip into the
holes in the door.
