Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Power Door Locks System Check performed? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 8 |
3 | Connect a J 39200 between the power door lock control module connector, cavity A for CKT 150 (BLK), and ground. Is continuity present? | -- | Go to Step 4 | Go to Step 9 |
4 |
Is continuity present? | -- | Go to Step 5 | Go to Step 6 |
5 |
Is continuity present? | -- | Go to Step 10 | Go to Step 11 |
6 |
Does the test lamp light? | -- | Go to Step 7 | Go to Step 12 |
7 |
Does the test lamp light? | -- | Go to Step 13 | Go to Step 14 |
8 | Repair the open in CKT 540 (ORN) between splice S228 and the power door lock control module. Refer to Wiring Repairs Is the repair complete? | -- | -- | |
9 | Repair the open in CKT 150 (BLK) between the power door lock control module and ground G201 or ground G200 in vehicles with upfitter provisions. Refer to Wiring Repairs Is the repair complete? | -- | -- | |
10 | Repair the short to ground in CKT 158 (WHT/BLK) between the power door lock control module and the side door jamb switch. Refer to Wiring Repairs Is the repair complete? | -- | -- | |
11 | Replace the side door jamb switch. Refer to Sliding Door Jamb Contact Plate Replacement . Is the repair complete? | -- | -- | |
12 | Repair the open in CKT 195 (LT BLU) between splice S241 and the power door lock control module connector, cavity C. Refer to Wiring Repairs Is the repair complete? | -- | -- | |
13 | Replace the power door lock control module. Is the repair complete? | -- | -- | |
14 | Repair the open in CKT 195 (LT BLU) between splice S241 and the power door lock control module connector, cavity H. Refer to Wiring Repairs Is the repair complete? | -- | -- |
