For 1990-2009 cars only
Removal Procedure
- Remove the instrument panel cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement.
- Squeeze the clip fasteners on the sides of the radio and pull out.
- Disconnect the electrical and the antenna connectors.
- Remove the radio from the vehicle.
Installation Procedure
- Install the radio to the vehicle.
- Connect the electrical and the antenna connectors.
- Align the mounting clips with the slots in the instrument panel and slide into place.
- Install the instrument panel cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement.
- Verify component operation.
- Refer to Control Module References for the programming and setup information.
