Floor Console Bezel Replacement Non-Luxury Upper

1. Remove the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .



2. Insert a flat bladed tool between the Bezel assembly and the console.
3. Pry the bezel from the console outwards partially in order to gain access to the connectors.



4. Disconnect the electrical connectors (1) and (2).
5. Remove the bezel from the console.

1. Place the bezel to the console.
2. Connect the electrical connectors (1) and (2).



3. Install the bezel to the console pushing on the corners till the retainers click in place.
4. Install the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

Floor Console Bezel Replacement Luxury Upper

1. Remove the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .



2. Insert a flat bladed tool between the Bezel assembly and the console.
3. Pry the bezel from the console outwards partially in order to gain access to the connectors.
4. Disconnect the electrical connectors (1).
5. Remove the bezel from the console.

1. Place the bezel to the console.
2. Connect the electrical connectors.
3. Install the bezel to the console by pushing on the corners until the retainers (1) click in place.
4. Install the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

Floor Console Bezel Replacement Non-Luxury Lower

1. Remove the cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .



2. Remove the upper bezel by inserting a flat bladed tool between the console and bezel.



3. Disconnect the electrical connectors (1, 2).
4. Remove the storage bin. Refer to Front Floor Console Compartment Replacement .



5. Insert a flat bladed tool between the console and bezel in order to pry it out.
6. Remove the bezel from the console.

1. Install the bezel to the console till it clicks in place.
2. Install the storage bin. Refer to Front Floor Console Compartment Replacement .



3. Connect the electrical connectors (1, 2) to the upper bezel.



4. Install the upper bezel till it clicks in place.
5. Install the cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .