Horns Components P42
Name | Location | Locator View | Connector End View |
|---|---|---|---|
Horn Relay | LH interior bulkhead on the relay bracket | ||
Horn Switch | Located in the steering wheel | -- | |
Horns | Body builder installed | ||
IP Fuse Block | Located by the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
C203 | Engine harness to the IP harness, in the bulkhead near P100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G200 | LH interior bulkhead near the relay bracket | -- | -- |
S100 | In the forward lamps harness, approximately 43 cm (16 in) from the horn breakout | -- | -- |
S103 | In the forward lamps harness, approximately 110 cm (41 in) from the LH lamps breakout toward the RH lamps breakout | -- | -- |
S204 | In the IP harness, approximately 20 cm (8 in) from the fuse block breakout towards C200 | -- | -- |
S205 | In the IP harness, approximately 4 cm (2 in) before the fuse block breakout toward C200 | -- | -- |
Horns Components P32
Name | Location | Locator View | Connector End View |
|---|---|---|---|
Horn Relay | Mounted on top of the steering column support at the driver's island | ||
Horn Switch | Located in the steering wheel | -- | |
Horns | Body builder installed | -- | |
IP Fuse Block | Located by the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
C100 | Engine harness to the forward lamps harness, at the LH side of the engine bulkhead near the battery junction block | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200 | Engine harness to the IP harness, at the top front of the steering column support near the park brake pull button switch | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 | Engine harness to the body builder provision harness, on top of the steering column support at the LH side | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G102 | Body builder installed | -- | -- |
G200 | Mounted to the top front of the steering column support plate | -- | -- |
P100 | Main wiring pass through at the bulkhead | Harness Routing Views in Wiring Systems | -- |
S100 | In the forward lamp harness, 27 cm (11 in) from the breakout for the LH headlamp | -- | -- |
S101 (Diesel) | In the engine harness, 16 cm (7 in) from the breakout for the auxiliary engine coolant fan motor, toward P100 | -- | -- |
S150 (Diesel) | In the engine harness, 14 cm (6 in) from P100, toward C100 and C207 | -- | -- |
S150 (Gas) | In the engine harness, 4 cm (2 in) from the breakout for the battery junction block toward C100 and C207 | -- | -- |
S201 | In the IP harness, 10 cm (4 in) from C200, toward the IP fuse block | -- | -- |
S204 | In the IP harness, 26 cm (10 in) from the horn relay breakout, toward P100 | -- | -- |
S234 (Diesel) | In the IP harness, 23 cm (9 in) from P100, toward the turn signal switch connector | -- | -- |
S234 (Gas) | In the IP harness, 35 cm (14 in) from the steering column harness breakout, toward P100 | -- | -- |
