Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Refer to Using Fused Jumper Wires in Wiring Systems. Did the low engine coolant light illuminate? | -- | Go to Step 7 | Go to Step 2 |
2 | Connect a test light from the instrument cluster connector, cavity 22, to ground. Did the test light illuminate? | -- | Go to Step 4 | Go to Step 3 |
3 | Repair the open in CKT 39 (PNK) between the GAUGES fuse and the instrument cluster connector. Is the repair complete? | -- | System OK | -- |
4 | Using a fused jumper wire, backprobe the instrument cluster connector, cavity 25, to ground. Refer to Using Connector Test Adapters in Wiring Systems. Did the low engine coolant light illuminate? | -- | Go to Step 5 | Go to Step 6 |
5 | Repair the open in CKT 68 (YEL/BLK) between the instrument cluster connector and the engine coolant level switch connector. Is the repair complete? | -- | System OK | -- |
6 | Replace the instrument cluster. Is the repair complete? | -- | System OK | -- |
7 | Connect a test light from the engine coolant level switch connector, cavity B, to B +. Did the test light illuminate? | -- | Go to Step 8 | Go to Step 9 |
8 | Replace the engine coolant level switch. Is the repair complete? | -- | System OK | -- |
9 | Repair the open in CKT 250 (BLK) between the engine coolant level switch connector and G 200. Is the repair complete? | -- | System OK | -- |
