Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Did the oil pressure gauge move toward HIGH? | -- | Go to Step 2 | Go to Step 3 |
2 | Replace the oil pressure sensor. Is the repair complete? | -- | System OK | -- |
3 | Backprobe the instrument cluster with a test light from connector cavity 15 to B +. Refer to Using Connector Test Adapters in Wiring Systems. Did the test light illuminate? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair the short to ground in CKT 31 (TAN) between the instrument cluster connector and the engine oil pressure sensor connector. Is the repair complete? | -- | System OK | -- |
5 | Backprobe the instrument cluster with a test light from cavity 31 to B +. Did the test light illuminate? | -- | Go to Step 7 | Go to Step 6 |
6 | Repair the open in CKT 451 (BLK/WHT) between the instrument cluster connector and G 108. Is the repair complete? | -- | System OK | -- |
7 | Replace the instrument cluster. Is the repair complete? | -- | System OK | -- |
