Courtesy or Dome Lamps Always On P32/42
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Disconnect connector C 207 (P42),or C 210 (P32). Does the dome lamp remain on? | -- | Go to Step 2 | Go to Step 3 |
2 | Repair the short to ground or to B + in the wiring beyond connector C 207 (P42), or C 210 (P32). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | System OK | -- |
3 |
Did the test light illuminate? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair the short to ground in CKT 156 (WHT). Is the repair complete? | -- | System OK | -- |
5 | Replace the IP lamps dimmer switch. Is the repair complete? | -- | System OK | -- |
Courtesy or Dome Lamps Always On P32 Export Only
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Does the test light illuminate? | -- | Go to Step 2 | Go to Step 5 |
2 |
Does the test light illuminate? | -- | Go to Step 3 | Go to Step 4 |
3 | Locate and repair short to B + in CKT 157 (GRY) between C 210 and the headlamp/panel dimmer switch. Is the repair complete? | -- | System OK | -- |
4 | Replace the headlamp/panel dimmer switch. Is the repair complete? | -- | System OK | -- |
5 | Connect a test light from C 210 of the body builders wire harness connector, cavity A to ground. Does the test light illuminate? | -- | Go to Step 6 | System OK |
6 |
Is the repair complete? | -- | System OK | -- |
