1. Disconnect the crankcase vent tube from the rear intermediate duct.



2. Remove the air cleaner duct bracket clamp bolt.



3. Loosen the rear intermediate duct hose clamps and remove the duct.



4. Remove air cleaner duct adapter to throttle body stud nut and duct.



5. Disconnect IAT sensor harness.
6. Remove MAF sensor. Refer to Mass Airflow Sensor Replacement .



7. Loosen the front intermediate duct to air cleaner duct clamp and remove the air cleaner duct.



8. Loosen the air cleaner duct to air cleaner clamp and remove the duct.

Important: Check the air cleaner duct components for proper alignment when installing the air cleaner duct components. Leave all of the clamps loose until all of the components are properly aligned, then tighten the clamps.

1. Install the air cleaner outlet duct and the clamp to the air cleaner assembly.
2. Install the MAF sensor. Refer to Mass Airflow Sensor Replacement .



3. Connect the IAT sensor harness connector.



4. Install the front intermediate duct and the clamp to the air cleaner duct.



5. Install the air cleaner duct adapter and nut to the throttle body.



6. Install the rear intermediate air cleaner duct and the clamps to the air cleaner adapter and to the air cleaner duct.



7. Install the air cleaner duct, the bracket clamp and the bolt to the bracket.



8. Install the crankcase vent tube to the rear intermediate duct.