Removal Procedure
- Using a small flat bladed
tool, pry the OnStarĀ® bezel tab down away from the overhead console.
- Remove the overhead console. Refer to
Roof Console Replacement
in Interior Trim.
- Disconnect the OnStarĀ® electrical connectors.
- Remove the 2 screws that retain the OnStarĀ® bezel to the overhead
console.
- Remove the OnStarĀ® button assembly from the overhead console.
Installation Procedure
- Install the OnStarĀ®
button assembly to the overhead console.
- Install the 2 screws that retain the OnStarĀ® bezel
to the overhead console.
- Reconnect the OnStarĀ® electrical connectors.
- Install the overhead console. Refer to
Roof Console Replacement
in Interior Trim.
- Snap the OnStarĀ® button assembly back into place in the overhead
console.