GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Venture Ext. 🢒 Body and Accessories 🢒 Body Control System 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure
  1. Remove the instrument panel (IP) upper trim. Refer to Instrument Panel Upper Trim Pad Replacement in Instrument Panel, Gages and Console.

    2. Object Number: 315296 Size: SH
  2. Disengage the retaining tabs in order to remove the door lock receiver from the IP upper trim.
  3. Disconnect the electrical connector from the door lock receiver.

Installation Procedure

    Object Number: 315296 Size: SH
  1. Connect the electrical connector to the door lock receiver.
  2. Engage the retaining tabs in order to install the door lock receiver to the IP upper trim.
  3. Install the IP upper trim. Refer to Instrument Panel Upper Trim Pad Replacement in Instrument Panel, Gages and Console.
  4. Program transmitter to the new receiver. Refer to Transmitter Programming .