Engine Mount Strut Bracket Replacement - Upper. Chevrolet Venture Ext. 2002

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2002 🢒 Venture Ext. 🢒 Engine 🢒 Engine Mechanical - 3.4L 🢒 Engine Mount Strut Bracket Replacement - Upper

Removal Procedure

Remove the engine mount strut from the engine mount strut bracket at the upper radiator support. Refer to Engine Mount Strut Replacement - Left Side and/or Engine Mount Strut Replacement - Right Side .

Remove the engine mount strut bracket bolts from the engine mount strut bracket.
Remove the engine mount strut bracket from the upper radiator support.

Installation Procedure

Position the engine mount strut bracket over the upper radiator support. Ensure that the engine mount strut bracket and the engine mount strut are aligned to the proper holes of the upper radiator support.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Install the engine mount strut bracket bolts to the engine mount strut bracket.

Tighten
Tighten the engine mount strut bracket bolts to 26 N·m (19 lb ft).

Install the engine mount strut to the engine mount strut bracket at the upper radiator support. Refer to Engine Mount Strut Replacement - Left Side and/or Engine Mount Strut Replacement - Right Side .