GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Tracker - 4WD 🢒 Body and Accessories 🢒 Stationary Windows 🢒 Rear Window Defogger Switch Replacement

Removal Procedure

    Object Number: 477545 Size: SH
  1. Remove the IP cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.
  2. Using a taped flat bladed tool, gently pry the rear window defogger switch (1) from the instrument panel.

    3. Object Number: 477547 Size: SH
  3. Disconnect the rear window defogger switch electrical connector (2).
  4. Remove the switch (1) from the vehicle.

Installation Procedure

    Object Number: 477547 Size: SH
  1. Connect the rear window defogger switch electrical connector (2).
  2. Install the rear window defogger switch (1) to the instrument panel. Ensure that the retaining tabs are fully engaged.
  3. Install the IP cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.