Info - Proper Position of Spare Tire Cover Emblem After Cover Installation

Ensure that the soft spare tire cover is installed with the Tracker emblem parallel to the bumper. When installing the cover during pre-delivery, inspect the cover. It can be adjusted without removing the spare tire again.

Pre-Delivery Procedure

1. Remove tire from the spare tire carrier.
2. Install the tire cover on the three studs on the carrier.
3. Install the tire and tighten lug nuts.
4. Pull the rear of the cover around the tire.
5. Install the front of the cover by pulling it around the tire and zipping it up
6. If the emblem is not parallel to the bumper, unzip the cover. Lower the cover and pull the back part of the cover around the tire to the left or right, as necessary.