GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Tracker - 2WD 🢒 Transmission/Transaxle 🢒 Clutch 🢒 Release Bearing Replacement

Removal Procedure
  1. Remove the manual transmission assembly from the vehicle. Refer to Two-Wheel-Drive Transmission Replacement or Four-Wheel-Drive Transmission Replacement in Manual Transmission.

    2. Object Number: 476446 Size: SH

    Important: DO NOT clean the clutch release bearing with a degreaser or solvents. Cleaning the clutch release bearing with a degreaser or solvents will damage the bearing seals. Use a clean, dry solvent-free cloth.

  2. Remove the clutch release Bearing (2) from the input shaft.
  3. Remove the clutch release shaft fork (1).
  4. Clean the clutch release bearing (2) with a clean, dry solvent-free cloth.
  5. Inspect the clutch release bearing (2) for external damage and smooth rotation. If external damage exists or the bearing does not operate smoothly, replace the clutch release bearing.

Installation Procedure
  1. Apply a thin coat of wheel bearing lubricant GM P/N 1051344, or the equivalent, to the transmission input shaft.

    2. Object Number: 476446 Size: SH
  2. Install the clutch release shaft fork (1) into the transmission housing; secure the clutch release bearing (2) to the clutch release shaft fork (1).
  3. Install the manual transmission assembly into the vehicle. Refer to Two-Wheel-Drive Transmission Replacement or Four-Wheel-Drive Transmission Replacement in Manual Transmission.