Step | Action | Yes | No |
|---|---|---|---|
1 | Did you review the Instrument Cluster Circuit Description and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the engine oil indicator is inoperative. Does the engine oil indicator operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Disconnect the oil pressure switch connector. Does the oil pressure indicator remain lit? | Go to Step 4 | Go to Step 5 |
4 | Repair the short to ground in the YEL/BLK wire or the instrument panel cluster printed circuit. Did you complete the repair? | Go to Step 7 | -- |
5 | Test the oil pressure with a mechanical gauge. Is the oil pressure normal? | Go to Step 6 | Go to Oil Pressure Diagnosis and Testing in Engine Mechanical - 1.6L or Oil Pressure Diagnosis and Testing in Engine Mechanical - 2.0L |
6 | Replace the oil pressure switch. Did you complete the repair? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
