Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the audible warnings circuit operation and perform the necessary inspections? | -- | Go to Step 2 | |
2 |
Did the dome lamp, lighting system and chime operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Actuate the dome lamp. Did the dome lamp operate normally? | -- | Go to Step 5 | Go to Step 4 |
4 | Test the lighting system. Did the lighting system operate normally? | -- | Go to Step 7 | Go to Step 6 |
5 | Test the door open signal circuit for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 8 | Go to Step 6 |
6 | Test the ignition key signal circuit for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 10 | Go to Step 8 |
7 | With the key in, test the ignition key signal circuit for voltage. Refer to Circuit Testing in Wiring Systems. Does the voltage measure near the specified value? | 10-12V | Go to Step 8 | Go to Step 9 |
8 | Replace the multifunction alarm. Refer to Multifunction Alarm Module Replacement . Did you complete the replacement? | -- | Go to Step 10 | -- |
9 | Replace the ignition switch. Refer to Steering Column Lock and Ignition Switch Cylinder Replacement - On Vehicle in Steering Wheel and Column. Did you complete the replacement? | -- | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
