GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Tracker - 2WD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Hazard Flasher Switch Replacement

Removal Procedure

    Object Number: 477544 Size: SH
  1. Remove the IP cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
  2. Using a taped flat bladed tool, gently pry the hazard warning switch (1) from the instrument panel.

    3. Object Number: 477543 Size: SH
  3. Disconnect the hazard warning switch electrical connector (2).
  4. Remove the switch (1) from the vehicle.

Installation Procedure

    Object Number: 477543 Size: SH
  1. Connect the hazard warning switch electrical connector (2).
  2. Install the hazard warning switch (1) to the instrument panel. Ensure that the retaining tabs are fully engaged.
  3. Install the IP cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .