Did you review the Exterior Lights Circuit Description and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Lighting Systems

Verify that the right rear turn signal lamp is inoperative.

Is the right rear turn signal lamp inoperative?

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections

1. Turn the ignition switch to the ON position.
2. Turn the turn signal switch to the RIGHT position.
3. Connect a test lamp between the turn signal lamp connector terminal 4 and ground.

Does the test lamp flash?

Go to Step 5

Go to Step 4

Repair the open in the GRN/YEL wire between the turn signal lamp and the junction block. Refer to Wiring Repairs in Wiring Systems and Lighting Systems Components .

Is the repair complete?

Go to Step 6

--

Repair the open in the BLK wire between the turn signal lamp and S300. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

Go to Step 6

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3