Step | Action | Yes | No |
|---|---|---|---|
1 | Did you review the Headlights/Daytime Running Lights (DRL) Circuit Description . and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the flash to pass headlamps are inoperative? Do the flash to pass headlamps operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Pull the Turn Signal/Headlamp Switch to the PASS position. Do the high beams operate? | Go to Step 4 | Go to Step 5 |
4 | Repair the open in the RED wire between cavity 20 and S234. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 9 | -- |
5 | Test for a short to ground condition between cavity 24 of the Turn Signal/Headlamp Switch and G200. Does a short to ground condition exist? | Go to Step 6 | Go to Step 7 |
6 | Repair the short to ground condition in the BLK wire from cavity 24 and G200. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 9 | -- |
7 | Test for continuity between cavity 20 and 24 of the Turn Signal/Headlamp Switch. Does continuity exist? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 8 |
8 | Replace the Turn Signal/Headlamp Switch. Refer to Headlamp Switch Replacement Did you complete the replacement complete? | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
