Step | Action | Yes | No |
---|---|---|---|
1 | Did you review the Exterior Lights Circuit Description and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the right side turn signal lamps are inoperative. Are the right side turn signal lamps inoperative? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections |
3 |
Is an open present? | Go to Step 5 | Go to Step 4 |
4 | Replace the turn signal switch. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in SIR. Is the repair complete? | Go to Step 8 | -- |
5 | Test for an open in the GRN/YEL wire between connector 216 and the junction block. Is an open present? | Go to Step 6 | Go to Step 7 |
6 | Repair the open in the GRN/YEL wire between connector 216 and the junction block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 8 | -- |
7 | Replace the junction block. Refer to Relay/Fuse Center Replacement in Wiring Systems. Is the repair complete? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
Step | Action | Yes | No |
---|---|---|---|
1 | Did you review the Exterior Lights Circuit Description and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the left side turn signal lamps are inoperative. Are the left side turn signal lamps inoperative? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections |
3 |
Is an open present? | Go to Step 5 | Go to Step 4 |
4 | Replace the turn signal switch. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in SIR. Is the repair complete? | Go to Step 8 | -- |
5 | Test for an open in the GRN/RED wire between connector 216 and the junction block. Is an open present? | Go to Step 6 | Go to Step 7 |
6 | Repair the open in the GRN/RED wire between connector 216 and the junction block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 8 | -- |
7 | Replace the junction block. Refer to Relay/Fuse Center Replacement in Wiring Systems. Is the repair complete? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |