Step | Action | Yes | No | ||||
---|---|---|---|---|---|---|---|
1 | Did you review the Backup Lamp Circuit Description and perform the necessary inspections? | Go to Step 2 | |||||
2 | Verify that the backup lamps remain illuminated when the manual selector is moved out of the REVERSE position. Do the backup lamps remain illuminated? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections | ||||
3 |
Do the backup lamps remain illuminated? | Go to Step 4 | Go to Step 5 | ||||
4 | Repair the short to voltage in the RED wire between the backup lamp switch or the transmission range switch and S318. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 6 | -- | ||||
5 |
Is the repair complete? | Go to Step 6 | -- | ||||
6 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |