GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2000
🢒
Tracker - 2WD
🢒
Body and Accessories
🢒
Lighting Systems
🢒 Hazard Flasher Switch Replacement
Removal Procedure
Remove the IP cluster trim plate. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
.
Using a taped flat bladed tool, gently pry the hazard warning switch (1) from the instrument panel.
Disconnect the hazard warning switch electrical connector (2).
Remove the switch (1) from the vehicle.
Installation Procedure
Connect the hazard warning switch electrical connector (2).
Install the hazard warning switch (1) to the instrument panel. Ensure that the retaining tabs are fully engaged.
Install the IP cluster trim plate. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
.