Step | Action | Yes | No |
---|---|---|---|
1 | Did you review the HVAC Blower Controls Circuit Description and perform the necessary inspections? | Go to Step 2 | |
2 | Operate the blower motor at each speed. Does the blower motor operate at high speed only? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
3 |
Does the test lamp light? | Go to Step 5 | Go to Step 4 |
4 | Repair the open in the PNK wire between the blower motor resistor and S204 (in the harness about 6 inches from the blower motor resistor connector). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 6 | -- |
5 | Replace the blower motor resistor. Refer to Blower Motor Resistor Replacement . Is the repair complete? | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |