Tools Required

J 33799 Shift Cable Housing Seal Installer

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the inner axle shaft and housing assembly. Refer to Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement .



3. Remove the clutch cable retainer spring (14) from the clutch fork (17).
4. Remove the clutch fork (17) and the clutch fork inner spring (16) from the inner axle shaft housing.
5. Remove the clutch fork housing seal (15) from the inner axle shaft housing (4).

Use a punch to drive out the seal.

1. Install the new clutch fork housing seal using the J 33799 .



2. Install the new clutch fork (17) and clutch fork inner spring (16) into the inner axle shaft housing.
3. Install the clutch cable retainer spring (14) onto the clutch fork (17).
4. Install the inner axle shaft and housing assembly. Refer to Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement .
5. Lower the vehicle.