Schematic Reference: Instrument Cluster Schematics

Did you review the Instrument Panel Cluster Description and Operation and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Instrument Panel, Gages and Console

Verify that the instrument cluster is inoperative.

Does the system operate normally?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Inspect the following indicators:

Are the inspected indicators inoperative?

Go to Step 4

Go to Step 6

Test the WHT/BLK between the instrument cluster connector C2 cavity 12 and G204 for an open.

Is an open condition present?

Go to Step 5

Go to Step 11

Repair the open in the WHT/BLK wire between the instrument cluster connector C2 cavity 12 and G204. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

Go to Step 13

--

Inspect the following indicators:

Are the inspected indicators inoperative?

Go to Step 7

Go to Step 8

1. Turn the ignition to the ON position.
2. Using a test lamp, check the instrument cluster assembly C1 cavity 2 to ground.

Does the test lamp illuminate?

Go to Step 8

Go to Step 9

Replace the instrument cluster assembly printed circuit. Refer to Printed Instrument Cluster Circuit Replacement .

Is the repair complete?

Go to Step 13

--

Test the battery positive voltage circuit between junction block 3 connector C2 and the instrument cluster assembly C1 cavity 2 for an open.

Is an open condition present?

Go to Step 10

Go to Step 8

Repair the open in the battery positive voltage circuit. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

Go to Step 13

--

Check connector C2 for damage.

Is the connector damaged?

Go to Step 12

Go to Step 8

Repair the connector. Refer to Connector Repairs in Wiring Systems.

Is the repair complete?

Go to Step 13

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3