Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the air inlet grille Panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.



2. Using the J 38778 , remove the wiper motor water deflector push-in retainer.
3. Remove the wiper motor water deflector from the wiper drive system module.

1. Position the wiper motor water deflector to the wiper drive system module.
2. Install the wiper motor water deflector push-in retainer.
3. Install the air inlet grille Panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.