Removal Procedure
- Remove the sunroof glass
panel. Refer to
Sunroof Glass Panel Replacement
.
- Use a flat-bladed tool to push the sunshade slide blocks into
the sunshade to release them from the sunroof guide assembly on one side
of the sunshade. Hold the slide blocks in the released position and lift
that side of the sunshade up.
- Remove the sunshade panel through the roof opening.
Installation Procedure
- Install the sunshade panel
through the roof opening.
- Insert the slide blocks on the right side of the sunshade into
the sunroof guide assembly.
- Push the sunshade slide locks on the left side of the sunshade
into the sunshade to allow the sunshade to drop into position. Once the sunshade
is in position, engage slide blocks into the left guide assembly.
- Slide the sunshade forward and backward to check for smooth operation.
- Install the sunroof glass panel. Refer to
Sunroof Glass Panel Replacement
.