- Connect the inflatable
restraint side impact module - LF connector (1), located under the
driver seat.
- Install the connector position assurance (CPA) to the side impact
module - LF connector.
- Connect the inflatable
restraint IP module connector, located at the RH side of the IP.
- Install the CPA to the IP module connector.
- Install the RH IP access hole cover.
- Connect the inflatable
restraint steering wheel module coil connector, located at the LH side of
the IP.
- Install the CPA to the steering wheel module coil connector.
- Install the SIR Fuse.
- Install the LH IP access hole cover.
- Staying well away from all inflator modules, turn ON the ignition.
10.1. | The AIR BAG indicator will flash 7 times. |
10.2. | The AIR BAG indicator will then turn OFF. |
- Perform the
Diagnostic System Check - SIR
if the AIR BAG indicator does not operate as described.