GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Impala 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Wiring Harness Replacement

Removal Procedure

    Object Number: 459259 Size: SH
  1. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  3. Remove the rear door rubber conduit form the rear door. Refer to Rear Side Door Conduit Replacement .
  4. Pull out the Harness connector from inside the pillar and disconnect the connector from the body harness.
  5. Disconnect the rear door wiring harness connectors from all of the accessories.
  6. Disconnect the rear door wiring harness rosebud retainers from the inner rear door panel.
  7. Remove the rear door wiring harness from the rear door.

Installation Procedure

    Object Number: 459259 Size: SH
  1. Install the rear door wiring harness to the rear door.
  2. Connect the rear door wiring harness rosebud retainers to the inner rear door panel.
  3. Connect the rear door wiring harness connectors to all the accessories.
  4. Install the rear door rubber conduit to the rear door. Refer to Rear Side Door Conduit Replacement .
  5. Connect the connector to the body harness.
  6. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  7. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .