Application | Specification | |
---|---|---|
Metric | English | |
A/C Low Pressure Switch | 6 N·m | 53 lb in |
A/C Pressure Relief Valve | 9 N·m | 80 lb in |
A/C Refrigerant Filter Retaining Nuts | 15 N·m | 11 lb ft |
Accumulator Bracket Retaining Screws | 6 N·m | 53 lb in |
Accumulator to Evaporator Retaining Nut | 16 N·m | 12 lb ft |
Air Distributor Duct to the Air Distribution Case | 4 N·m | 35 lb in |
Air Distributor Duct to the IP | 4 N·m | 35 lb in |
Air Outlet Duct Screws | 2 N·m | 18 lb in |
Auxiliary A/C Service Kit Fittings 3/4 inch Diameter | 48 N·m | 35 lb ft |
Auxiliary A/C Service Kit Fittings 3/8 inch Diameter | 19 N·m | 14 lb ft |
Auxiliary Coolant Control Valve Nut | 5 N·m | 44 lb in |
Auxiliary Evaporator Hose Retaining Bolt | 6 N·m | 53 lb in |
Auxiliary Evaporator Hose to the Compressor Fitting | 48 N·m | 35 lb ft |
Auxiliary Evaporator Hose to the Evaporator Tube | 48 N·m | 35 lb ft |
Auxiliary Evaporator Module Securing Nuts | 10 N·m | 89 lb in |
Auxiliary Evaporator Tube to Vehicle Nut | 48 N·m | 35 lb ft |
Auxiliary Heater Case Screws | 1.9 N·m | 17 lb in |
Auxiliary Heater Retaining Nuts | 10 N·m | 89 lb in |
Auxiliary Line Retainers to the Body | 5 N·m | 44 lb in |
Blower Motor Resistor Screws | 2 N·m | 18 lb in |
Blower Motor Retaining Screws | 2 N·m | 18 lb in |
Compressor Mounting Bolts (L18) | 50 N·m | 37 lb ft |
Compressor Mounting Bolts (L30) | 50 N·m | 37 lb ft |
Compressor Mounting Bolts (L31) | 50 N·m | 37 lb ft |
Compressor Mounting Bolts (L35) | 50 N·m | 37 lb ft |
Compressor Mounting Bolts (L65) | 50 N·m | 37 lb ft |
Compressor Retaining Bolts | 50 N·m | 37 lb ft |
Compressor Suction/Discharge Hose to the Compressor Bolt | 45 N·m | 33 lb ft |
Compressor Suction Hose to the Accumulator Fitting | 48 N·m | 35 lb ft |
Compressor Discharge Hose to the Condenser Fitting | 28 N·m | 21 lb ft |
Condenser Retaining Bolts to the Radiator Support | 10 N·m | 89 lb in |
Evaporator Case Front Cover Retaining Screws | 6 N·m | 53 lb in |
Evaporator Tube Connections at TXV | 28 N·m | 21 lb ft |
Evaporator Tube to the Condenser Fitting | 19 N·m | 14 lb ft |
Evaporator Tube to the Evaporator Fitting | 19 N·m | 14 lb ft |
Evaporator Tube to the Auxiliary A/C Lines | 19 N·m | 14 lb ft |
Heater and Air Conditioning Control to the IP | 5 N·m | 44 lb in |
Heater Case Retaining Nuts | 6 N·m | 53 lb in |
Heater Core Access Cover Screws | 1.9 N·m | 17 lb in |
Heater Module Screws | 1.9 N·m | 17 lb in |
HVAC Module Screws | 1.9 N·m | 17 lb in |
HVAC Module Retaining Nuts | 6 N·m | 53 lb in |