Removal Procedure
- Remove the coil spring. Refer to
Coil Spring Replacement .
- Remove the upper and lower rubber insulators from the coil spring.
Installation Procedure
Important:
| • | Spray silicon lubricant on the insulators to aid in installation. |
| • | Make sure that part number identification tape located on the coil spring is oriented outboard of the vehicle and at the top of the spring. |
| • | Make sure to fully seat the top and bottom coil spring insulators to the spring. |
- Install the upper and lower rubber insulators to the coil spring.
- Install the coil spring. Refer to
Coil Spring Replacement .
