Removal Procedure
- Remove the sunshade (3)
from the sunshade anchor.
- Rotate the sunshade (3) parallel to the door and pull in
a downward motion in order to disconnect the sunshade retention clip.
- Remove the sunshade (3) from the sunshade bezel (2).
- Disconnect the electrical connector if required.
- Remove the sunshade bezel (2) from the headliner (1)
if required.
Installation Procedure
- Install the sunshade bezel (2)
to the headliner (1) if required.
- Connect the electrical connector if required.
- Align the sunshade (3) parallel to the door.
- Install the sunshade (3) to the sunshade bezel (2).
Push up on the sunshade (3) and rotate the sunshade toward the front
glass in order to connect the retention clip.
- Reattach the sunshade (3) to the sunshade anchor.